Details
Harness: Belgian Flag Dog Harness Size: XXS Extra Extra Small Dog (mini-mini) Chest Messurements: 15.75-21 inches / 40-53cm Dog Weight: Weight: 8.8-15.5lbs / 4-7kg
This dog harness with a Belgian flag design has all the features of our popular Innova Dog Comfort (IDC) Powerharness range.
Harness Features:
Other Available Sizes For a full sizing chart and information on how to measure your dog for a correct fitting harness, please read our dog harness measuring guide.
Available National Flag Dog Harnesses:
Additional Information
| Harness size | Mini-Mini |
|---|---|
| SKU | 16IDC-BG-MM |
| EAN Code | 5999053653859 |
| Status | Enabled |
To adjust the velcro chest strap developed by Julius-K9® in 1997, open it and loop it through the oval ring which is on the front side of the harness.
Close it on the inner side so the velcro's hooks and loops are facing each other. Set between the minimum and maximum length settings, the chest strap can support several times the dog's weight.
TAKING YOUR DOG'S MEASUREMENTS CORRECTLY
Taking thorough measurements of your dog is essential for choosing the correct harness size. Place 4 fingers behind the front legs to find where to measure the chest (girth) for harness sizes 0, 1, 2, 3 and 4, and 2 fingers to take measurements for sizes Baby1 and Baby2.
PUTTING THE HARNESS ON YOUR DOG
Before putting on the harness, it is very important to adjust the chest strap and the lower strap under the chest correctly. If the straps are too loose, the dog might be able to back out of the harness. When the lower strap under the chest is too tight, it is 'merely' uncomfortable for the dog.
When the chest strap is too tight, the buckle rubs against the dog's skin in the armpit area, which can cause chafing. If the lower strap under the chest is adjusted correctly, there should be enough room for you to fit your fingers between the dog's back and the harness.
SECURING THE HANDLE
The handle part on the IDC® Powerharness has 4 di erent fastening options. It is possible to secure only the INOX® ring or only the handle, or both, or neither. Handles on IDC® harnesses (sizes Mini and Mini-Mini) and K9® harnesses can be secured/covered up with velcro, thus minimizing the risk of the dog getting caught on something by the handle part. This is especially important for dogs running free.
WHAT TO DO IF THE DOG BACKS OUT OF THE HARNESS?
In case your dog attempts to slip out of the harness by backing out of it, or tries to pull its head out of the collar, avoid pulling the leash.
CHOOSING THE CORRECT HARNESS SIZE IS ESSENTIAL FOR A SAFE AND COMFORTABLE USE
Warning!
Choosing the wrong harness size, as well as incorrect harness adjustment and collar use may result in the dog slipping out of the harness or the collar. If the harness is too small, the chest strap puts pressure on the dog's neck instead of distributing it over the chest area. Choosing the wrong harness size may result in injury.
The right harness size should leave the dog with enough room in the shoulder area and it should be able to move its legs freely. If the harness is too big, the dog might step over the chest strap with its front legs. JULIUS-K9® holds no responsibility for any injuries resulting from choosing the wrong harness size or incorrect harness adjustment.
WASHING INSTRUCTIONS
Do not Machine wash! Hand wash. Maximum temperature 40°C or 105°F. Wash separately!
EUROPEAN PATENT OFFICE REGISTRATION NUMBERS
U09 00241, U10 00002, 001632258-0001 402010004256-0003, 402010005060-0006, 402010005060-0007, 402010005060-0008 402010005060-0012, 012040382 402010005060-0012
