Julius-K9 IDC Power Dog Harness - Size Mini Mini - Baige*** FREE DELIVERY ***
If you are not sure about the harness size please read the guide at the end of this listing
The IDC Powerharness is an anatomically perfected K9 Powerharness, has a lower better fitting angle on the front. Perfect for dog training, walking, pet and working dogs. These canine dog harnesses can be used with Julius-K9 dog collars and leads, chest pads, dog seat belt connectors, etc.
- innovative, sporty, dynamic design
- ergonomic perfection, size adjusted lines- Eco inner lining material - breathable and skin friendly- toughened fixing buckle for safety and comfort- luminous side labels – Julius-K9 branded- reflective chest strap and edge protection- tested security straps- lamp holder on both sides of the handle- extended label field (50 x 190 mm)- strap closure handle and middle ring to avoid the risk of catching- haversack fixing option (3+1 fixing options)- “all time” luminous, replaceable side labels- joint product of German, Austrian and Swiss raw material manufacturers and small EU firms
Available harness sizes
Size Chest circumference Weight of the dog Baby 1 11.4 - 14.15 inches / 29 - 36 cm 1.75 - 6.6 lbs / 0,8 - 3 kg Baby 2 13 - 18 inches / 33 - 45 cm 4.4 - 11 lbs / 2 - 5 kg Mini & Mini 15.75 - 21 inches / 40 - 53 cm 8.8 - 15.5 lbs / 4 - 7 kg Mini
20 - 26.4 inches / 49 - 67 cm 15.5 - 33 lbs / 7 - 15 kg Size 0 22.8 - 30 inches / 58 - 76 cm 30 - 55 Ibs / 14 - 25 kg Size 3 26 - 33.5 inches / 63 - 85 cm 50 - 66 Ibs / 23 - 30 kg Size 2 28 - 38 inches / 71 - 96 cm 61 - 88 lbs / 28 - 40 kg Size 3 32.3 - 46.5 inches / 82 - 115 cm 88 - 176 Ibs / 40 - 70 kg Size 4 over 43 inches / 98 - 138 cm 154 - 198 Ibs / 70 - 90 kg
JULIUS-K9 UK LTD is a UK based company providing customers with some of the best dog harnesses, dog leads, dog training equipment and many other high quality canine equipment. We are popular for some of our best canine designs and confident that you will love our K9 dog gear.
The original JULIUS-K9® Harness / Make sure you buy original!
How to measure your dog for the right size Julius K9 Dog Harness:
Choosing the right size dog harness. The girth of the dog is measured about 4 fingers (2inches) behind the front legs where the belly strap will go around.
Attaching the dog harness
When attaching the dog harness, special care must be given to the proper adjustment of the chest strap and the belly strap. If the straps are left too loose, the dog might be able to back out of it, if the belly strap is too tight can be uncomfortable for the dog and the buckle may rubs the skin. So for the correct fitting please follow the steps below.
When adjusting the straps, two things should be kept in mind:
1. The chest strap should be adjusted in such a way that you can fit four fingers comfortably between the front legs of the dog and the belly strap (for sizes Baby1 and Baby2 it is enough to leave a two-finger distance).
2. The belly strap is adjusted properly if you can slide your fingers under the harness on the back of the dog.
To adjust the velcro chest strap developed by Julius-K9® in 1997, open it and loop it through the oval ring which is on the front side of the harness.
Close it on the inner side so the velcro's hooks and loops are facing each other. Set between the minimum and maximum length settings, the chest strap can support several times the dog's weight.
TAKING YOUR DOG'S MEASUREMENTS CORRECTLY
Taking thorough measurements of your dog is essential for choosing the correct harness size. Place 4 fingers behind the front legs to find where to measure the chest (girth) for harness sizes 0, 1, 2, 3 and 4, and 2 fingers to take measurements for sizes Baby1 and Baby2.
PUTTING THE HARNESS ON YOUR DOG
Before putting on the harness, it is very important to adjust the chest strap and the lower strap under the chest correctly. If the straps are too loose, the dog might be able to back out of the harness. When the lower strap under the chest is too tight, it is 'merely' uncomfortable for the dog.
When the chest strap is too tight, the buckle rubs against the dog's skin in the armpit area, which can cause chafing. If the lower strap under the chest is adjusted correctly, there should be enough room for you to fit your fingers between the dog's back and the harness.
SECURING THE HANDLE
The handle part on the IDC® Powerharness has 4 di erent fastening options. It is possible to secure only the INOX® ring or only the handle, or both, or neither. Handles on IDC® harnesses (sizes Mini and Mini-Mini) and K9® harnesses can be secured/covered up with velcro, thus minimizing the risk of the dog getting caught on something by the handle part. This is especially important for dogs running free.
WHAT TO DO IF THE DOG BACKS OUT OF THE HARNESS?
In case your dog attempts to slip out of the harness by backing out of it, or tries to pull its head out of the collar, avoid pulling the leash.
CHOOSING THE CORRECT HARNESS SIZE IS ESSENTIAL FOR A SAFE AND COMFORTABLE USE
Choosing the wrong harness size, as well as incorrect harness adjustment and collar use may result in the dog slipping out of the harness or the collar. If the harness is too small, the chest strap puts pressure on the dog's neck instead of distributing it over the chest area. Choosing the wrong harness size may result in injury.
The right harness size should leave the dog with enough room in the shoulder area and it should be able to move its legs freely. If the harness is too big, the dog might step over the chest strap with its front legs. JULIUS-K9® holds no responsibility for any injuries resulting from choosing the wrong harness size or incorrect harness adjustment.
Do not Machine wash! Hand wash. Maximum temperature 40°C or 105°F. Wash separately!
EUROPEAN PATENT OFFICE REGISTRATION NUMBERS
U09 00241, U10 00002, 001632258-0001 402010004256-0003, 402010005060-0006, 402010005060-0007, 402010005060-0008 402010005060-0012, 012040382 402010005060-0012